ONOSOKKIEngine vibration sensorVP-1210/VP-1220It is an electric vibration sensor used to measure the speed of gasoline and diesel engines. As long as it is installed on the engine cylinder head, it can detect the vibration pulse when the cylinder is burned and exploded. The sensor is small and light, and a magnet is installed at the bottom of the sensor. It can be adsorbed on the cylinder head of the engine by the suction of the magnet, so it is very convenient to use and install. In addition, the signal cable of the sensor is designed to be resistant to high temperatures, so it can work normally and stably even if it is installed in the engine box. VP-1210 / 1220 is a high-sensitivity type and can be used in an environment with less vibration. The speed displays used with this sensor are: AR-7240, CT-6700, SE-1620, SE-2500, FT-2500, FT-7200, GE-2500, etc. The signal cable connector of VP-201 / 1210 is a micro connector; the signal cable connector of VP-202 / 1220 is a BNC connector. Features Even if there are nuts or bolts on the cylinder head, it does not matter. The sensor is equipped with a magnet, which makes installation very simple and convenient. It has excellent rigidity and durability, and is not affected by the environment. It is very simple and convenient to use and install. * Depending on the engine structure, it may occasionally fail to detect. Brief specifications Measurement object 4-stroke gasoline engine and diesel engine Sensing method Electric vibration method Sensor installation location Bolts and nuts on the engine cylinder head, or the fixing bolts of the engine Output signal Pulse signal Operating temperature range 0 ~ +100 ℃ Storage temperature range -10 ~ +120 ℃ Dimensionsφ25×50 mm Weight Approx. 110 g (including signal cable) Signal cable VP-201 / 1210: Chloroprene rubber cable 2.9 m (Sensor direct tap) — (Mini plug) VP-202 / 1220: Chloroprene rubber cable 2.10 m (Sensor direct tap) — (BNC plug)